Detailed Product Description

Features of Heat Pipe Solar Collector:
1) Materials:
a) Manifold casing material: Aluminum alloy
b) Frame material: Aluminum alloy
c) Header pipe material: C12200 copper
d) Insulation: polyurethane foam
e) Rubber seals and rings: stabilized high temperature silicone rubber
2) Optimal installation angle:
a) Vertical: 30 - 70°
b) Horizontal: 0°
3) Maximum operating pressure: 0.6 - 0.8MPa
4) Optimal flow rate: 0.1L/min/tube - 0.026GL/min/tube
5) Reliable, efficient, evacuated tubes
6) Copper heat pipes for rapid heat transfer
7) Easy plug-in installation
8) Maintenance free
9) Suitable for mains pressure water (working pressure: 0.6MPa)
10) Provides stable solar conversion throughout the day

Working theory:
1) Solar radiation is absorbed by the solar tubes and converted into
heat. Heat pipes then conduct the heat from within the solar tube up
to the header pipe
2) Water is circulated through the heater, via intermittent pump
cycling. Each time when water circulates through the heater the
temperature is raised by 5 to 10°C (9 to 18°F). Throughout
the day, the water in the storage tank is gradually heated